Wake on Lan not working with my UD-3900

Hi, Wake on Lan works fine when the ethernet cable is plugged into the hub on my computer, but doesn’t work when its plugged into the hub on the UD-3900.

Things I think that are worth noticing:

  1. I’m using a Lenovo T440s

  2. I have disabled “UEFI IPv4 Network Stack” and “UEFI IPv6 Network Stack” in the BIOS setup in order to make Wake on Lan work (To solve error: “Start PXE over IPv4” / “Start PXE over IPv6”)

  3. I have checked both “Allow this device to wake the computer” and “Only allow a magic packet to wake the computer” for both “Intel® Ethernet Connection l218-LM” and “Plugable Ethernet” in Device Manager

  4. “Fast Startup” is disabled

  5. I have the latest driver installed (http://plugable.com/drivers/displaylink)

Thank you very much for the help!

As you have posted two questions, I have merged them into one in the other thread here -> http://support.plugable.com/plugable/…