my screens do not work

#1

I just lost both of my screens at the same time. I have 2 different plugable units one 4k and the other 2k that just quite working at the same time. My other 3 screens still work of my graphics card.

#2

Hi David,

Thanks for reaching out to us, I am sorry the graphics adapters are not working as expected.

Based on your description, the most likely cause is a software issue, our first step is to reset the dock and perform a ‘clean’ installation of the required DisplayLink drivers to help ensure both are in a good state. Please perform the following:

  1. Disconnect the dock from the system and please remove the power cable from the dock so it turns off completely (this is important so the unit resets). Please keep it disconnected until the last step.
  2. Uninstall any and all software with ‘DisplayLink’ in the title that is present from within the Control Panel -> Programs and Features. Don’t worry if these entries are not present or if the process does not work, just move onto the next step
  3. Download and run the DisplayLink Installation Cleaner utility, found here –> https://s3.amazonaws.com/plugable/bin… and ensure it displays “Cleaning Complete” when done (video walk-through if you need it -> https://youtu.be/AcVV1gD_FvI)
  4. Once the Cleaner has been run, reboot (even if not prompted to)
  5. Now download and install the 8.4 M0 DisplayLink software, found here –> https://s3.amazonaws.com/plugable/bin…
  6. Reattach the power cable to the dock first. Once the dock is powered on, reconnect it to your system. If the device is not detected, please reboot the system.

Please let us know if that helps get things working how they should, and we’ll go from there.

Pat
Plugable Technologies
www.plugable.com/support

#3

Hello David,

We’re closing this thread due to inactivity, but if you have any further questions please feel free to contact support@plugable.com and we’ll be happy to help.

Thanks,

Pat
Plugable Technologies
www.plugable.com/support

#4