[Half solved :-) ]NUC8i3BEH and TBT3-HDMI2X-83

Hello,

I’m trying to use the TBT3-HDMI2X-83 with the NUC8i3BEH. This one supports thunderbolt, and is even mentioned by Intel as exemple of supported device.

I want to connect a second display through USB-C (first one is connected to the HDMI port of the NUC).
But it doesn’t work.
When I connect the device to the NUC, windows 10 doesn’t react. Nor when the display is connected with the Plugable.

Windows 10 is updated. Drivers too.
In the bios, Thunderbolt controller is checked.

The USB-C port works. When I connect a smartphone to it, this one charges (but that’s all ; I can’t load data).

So, I don’t understand why it doesn’t work.

I hope someone has an idea.

Thanks.

Hello Karval,

Thank you for contacting Plugable support! Sorry to hear about this issue. I’d be more than happy to assist you.

Do you recall if you’ve already installed the Thunderbolt 3 drivers?

https://downloadcenter.intel.com/download/28735/Thunderbolt-3-DCH-Driver-for-Windows-10-for-Intel-NUC?product=126150

You’ll also need the Thunderbolt Control Center software (available on the Microsoft Store) to approve and manage Thunderbolt devices.

Without these two things you won’t be able to utilize Thunderbolt 3 devices on your system.

Please don’t hesitate to let us know of other questions.

Thanks again for contacting Plugable support and best wishes!

Joshua Henry

Senior Engineer
Plugable Technologies


http://plugable.com | http://performance.plugable.com/

Hello.

Yes, I have installed the drivers you have linked.
I have done it by doing a right click on each inf file.
Then I tried to install the Thunderbolt control center, but it doesn’t work. According to the reviews, like many many other users.
Error 0x803FB005. I followed the method to manage this error, but it make no difference.

Then, I have found these drivers https://downloadcenter.intel.com/download/28658/Thunderbolt-3-Legacy-Driver-for-Windows-10-for-Intel-NUC which come with a setup.msi file. More friendly use.
That also install “Thunderbolt software”. It allows me to manage devices connected to Thunderbolt. Theoretically. Cause it shows no device.

Thanks to spend your time to answer me.

Thanks for trying. After further research it appears even if we can get the system to recognize the adapter, it appears that system will only support a single display over its Thunderbolt 3 port due to how it was designed by Intel (a hardware limitation between the graphics chipset and the Thunderbolt 3 chipset).

https://www.intel.com/content/www/us/en/support/articles/000021752/intel-nuc.html

Unfortunately due to this limitation I’d suggest to return the adapter for a full refund and look into an alternative option like a USB-C to HDMI adapter/cable.

I’m sorry for this news!
Josh

Oh !
I hoped you had a solution.
I had already tried a cable, but it didn’t worked.

I will try the UD-3900 Docking Station.
I think my problem is the USB-C port. It don’t allow data transfert. So, maybe through a USB3 port, I will have this second display.

Thanks for your help.

I was hoping for better news as well.

The UD-3900 would be a good solution in this case since it doesn’t rely on USB-C or Thunderbolt 3 specific technologies and is much more universal.

If you ever need anything else just let us know!

Just for the knowledge, my wish was fulfilled.
Before to receive the UD-3900, I have installed the DisplayLink driver.
Without believe it, I have tried another time my USB C -> HDMI cable I had bought before the TBT3-HDMI2X-83. And it works.
The second display is usable.
No mention about Thunderbolt in windows, though.

So my problem is half solved. I can connect a second display through the USB C port, but not due to Thunderbot.

Thanks for your time.

1 Like