When I hook my monitor up to DC-125 it sets proper resolultion accodring to xrandr 1366x768. However, all I see on the screen is diagonal lines.
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 2048 x 2048
DVI-3 connected 1366x768+0+0 698mm x 392mm
1366x768 59.8*+
1024x768 75.1 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
640x400 70.0 60.0
if I plug in the DC-125 without the monitor connected it sets it to 1024x768 which actually displays right. But it starts having artifacts show up (mouse leaving trail etc…) after about 5 minutes of light use the display will completely lockup and I will get the following in dmesg repeating over and over. The only way I can get out of it is to unplug the DC-125.
[9838.328043] [drm] wait for urb interrupted: ffffffc2 available: 0
[9839.328042] [drm] wait for urb interrupted: ffffffc2 available: 0
[9840.328051] [drm] wait for urb interrupted: ffffffc2 available: 0
[9841.328049] [drm] wait for urb interrupted: ffffffc2 available: 0
[9842.328050] [drm] wait for urb interrupted: ffffffc2 available: 0
[9843.328040] [drm] wait for urb interrupted: ffffffc2 available: 0
I’m running fedora18 with all the latest updates. any help you could give would be wonderful.